| Total Views: 354 - Total Replies: 5 |
|
| POSTED BY: allenz on 11/11/2010 06:28:53 PM |
|
I need to take the oil pan off of my 99 f350 2wd with a powerstroke. Do I have to take the whole engine out like the manual says, or is there another way to do it?
--------------------------------------------------------------
Straight Shooting, Pork Eating, Red-Blooded Infidel
|
|
| POSTED BY: Cityrdnck on 11/11/2010 06:45:09 PM |
|
You should just have to lift the motor up 2 or 3 inchs to get the oil pan out
--------------------------------------------------------------
  DoWn & DiRtY  |
| Back To Top |
|
| POSTED BY: allenz on 11/11/2010 07:08:07 PM |
|
I appreciate it. Ill just lift the motor up a little bit. I dont have anyone to hep me lift the cab off.
--------------------------------------------------------------
Straight Shooting, Pork Eating, Red-Blooded Infidel
|
| Back To Top |
|
| POSTED BY: gaston on 06/04/2011 05:18:08 PM |
|
jack it up and take it out
--------------------------------------------------------------
god gave me you for the up's and down's
|
| Back To Top |
|
The easiest way to get it out, is pull it out the front, but it you pull the turbo you can get the engine up high enough to get the pan out |
| Back To Top |
|
| POSTED BY: jaydog on 01/11/2012 01:46:31 AM |
|
u dont hav to pull the cab offbut you have to take turbo and the rad.,inter cooler and the cross member that is bolted on the front off and yes you have to pull the motor to do the oil pan and may i ask y ur pulling the oil pan 
--------------------------------------------------------------
lov to go mud boggin
|
| Back To Top |
|
|
